Lumen range
Estimate delivered light from room geometry and target illuminance. Do not substitute input watts for luminous flux.
Example review bands: under 2,000 lm · 2,000–5,000 lm · above 5,000 lmUse lumen range, mounting, environmental exposure and dimming interface to narrow the first review. Then verify the exact ordering code.
Estimate delivered light from room geometry and target illuminance. Do not substitute input watts for luminous flux.
Example review bands: under 2,000 lm · 2,000–5,000 lm · above 5,000 lmChoose recessed, surface, suspended or track after checking aperture, ceiling depth, support and aiming access.
Constraint: existing ceiling conditions can eliminate nominal matches.Use an ingress rating only where dust or moisture exposure calls for it. A higher IP number does not establish cleaning-chemical compatibility.
Confirm the tested enclosure configuration.Match phase dimming, 0-10V or DALI-2 to the project topology, sensor strategy and commissioning resources.
Drivers and control devices must be checked as a system.Request the current product sheet and corresponding IES or LDT file. Build the room with actual dimensions, mounting height, reflectances and maintenance assumptions; compare calculated horizontal and vertical illuminance, glare context and connected load. A physical sample or representative mock-up can then test finish, perceived brightness, dimming behavior and sensor response. Published examples such as 12,000 lm, 150 lm/W, IP65 or L70 50,000 h describe specification formats, not universal Savant values. Availability and test conditions vary by configuration.
Send four inputs and the project market.
Submit selection inputs